Lines Matching full:indirect
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
325 /* command structures and indirect data structures */
329 * - _data for indirect sent data
330 * - _resp for indirect return data (data which is both will use _data)
365 /* Send driver version (indirect 0x0002) */
415 /* Get function capabilities (indirect 0x000A)
416 * Get device capabilities (indirect 0x000B)
493 /* Set ARP Proxy command / response (indirect 0x0104) */
512 /* Set NS Proxy Table Entry Command (indirect 0x0105) */
553 /* Manage MAC Address Read Command (indirect 0x0107) */
660 /* Used by many indirect commands that only pass an seid and a buffer in the
672 /* Get Switch Configuration command (indirect 0x0200)
710 /* Get Switch Configuration (indirect 0x0200)
748 /* Get Switch Resource Allocation (indirect 0x0204) */
861 /* Add VSI (indirect 0x0210)
862 * this indirect command uses struct i40e_aqc_vsi_properties_data
863 * as the indirect buffer (128 bytes)
865 * Update VSI (indirect 0x211)
868 * Get VSI (indirect 0x0212)
1147 /* Add MAC-VLAN (indirect 0x0250) */
1163 /* indirect data for command and response */
1196 /* Remove MAC-VLAN (indirect 0x0251)
1217 /* Add VLAN (indirect 0x0252)
1218 * Remove VLAN (indirect 0x0253)
1400 /* Add Cloud filters (indirect 0x025C)
1401 * Remove Cloud filters (indirect 0x025D)
1403 * and the generic indirect completion structure
1593 * and the generic indirect completion structure
1646 /* Add Mirror Rule (indirect or direct 0x0260)
1647 * Delete Mirror Rule (indirect or direct 0x0261)
1702 /* Almost all the indirect commands use
1731 /* Configure VSI Bandwidth Limit per Traffic Type (indirect 0x0406)
1746 /* Configure VSI Bandwidth Allocation per Traffic Type (indirect 0x0407)
1759 /* Query vsi bw configuration (indirect 0x0408) */
1774 /* Query VSI Bandwidth Allocation per Traffic Type (indirect 0x040A) */
1799 /* Enable Physical Port ETS (indirect 0x0413)
1800 * Modify Physical Port ETS (indirect 0x0414)
1801 * Disable Physical Port ETS (indirect 0x0415)
1816 /* Configure Switching Component Bandwidth Limits per Tc (indirect 0x0416) */
1831 * (indirect 0x0417)
1843 /* Query Switching Component Configuration (indirect 0x0418) */
1855 /* Query PhysicalPort ETS Configuration (indirect 0x0419) */
1873 * (indirect 0x041A)
1893 * (indirect 0x041D)
1921 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
2371 /* NVM Read command (indirect 0x0701)
2373 * NVM Update commands (indirect 0x0703)
2394 /* NVM Config Read (indirect 0x0704) */
2409 /* NVM Config Write (indirect 0x0705) */
2477 /* OEM Post Update (indirect 0x0720)
2497 /* Thermal Sensor (indirect 0x0721)
2513 /* Send to PF command (indirect 0x0801) id is only used by PF
2514 * Send to VF command (indirect 0x0802) id is only used by PF
2515 * Send to Peer PF command (indirect 0x0803)
2540 /* Indirect write (indirect 0x0901)
2541 * Indirect read (indirect 0x0903)
2590 /* Get LLDP MIB (indirect 0x0A00) */
2628 /* Add LLDP TLV (indirect 0x0A02)
2629 * Delete LLDP TLV (indirect 0x0A04)
2642 /* Update LLDP TLV (indirect 0x0A03) */
2689 * returns below as indirect response
2747 /* Set Local LLDP MIB (indirect 0x0A08)
2987 /* Scatter/gather Reg Read (indirect 0xFF05)
2988 * Scatter/gather Reg Write (indirect 0xFF06)
3007 /* dump internal data (0xFF08, indirect) */