Lines Matching +full:chip +full:- +full:to +full:- +full:chip

4 - #address-cells, #size-cells : Must be present if the device has sub-nodes
6 - compatible : May include a device-specific string consisting of the
7                manufacturer and name of the chip. A list of supported chip
9                Must also include "jedec,spi-nor" for any SPI NOR flash that can
12                Supported chip names:
50                The following chip names have been used historically to
53                  m25p05-nonjedec
54                  m25p10-nonjedec
55                  m25p20-nonjedec
56                  m25p40-nonjedec
57                  m25p80-nonjedec
58                  m25p16-nonjedec
59                  m25p32-nonjedec
60                  m25p64-nonjedec
61                  m25p128-nonjedec
63 - reg : Chip-Select number
64 - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
67 - m25p,fast-read : Use the "fast read" opcode to read data from the chip instead
70                    Refer to your chips' datasheet to check if this is supported
71                    by your chip.
72 - broken-flash-reset : Some flash devices utilize stateful addressing modes
73 		   (e.g., for 32-bit addressing) which need to be managed
79 		   state. This boolean flag can be used on such systems, to
85 		#address-cells = <1>;
86 		#size-cells = <1>;
87 		compatible = "spansion,m25p80", "jedec,spi-nor";
89 		spi-max-frequency = <40000000>;
90 		m25p,fast-read;