Lines Matching full:mmc
4 $id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
7 title: MMC Controller Common Properties
13 These properties are common to multiple MMC host controllers. Any host
17 It is possible to assign a fixed index mmcN to an MMC host controller
23 pattern: "^mmc(@.*)?$"
52 # *NOTE* on CD and WP polarity. To use common for all SD/MMC host
96 - some mmc host controllers do support a max frequency upto
135 cap-mmc-highspeed:
138 MMC high-speed timing is supported.
170 cap-mmc-hw-reset:
190 mmc-ddr-1_2v:
195 mmc-ddr-1_8v:
200 mmc-ddr-3_3v:
205 mmc-hs200-1_2v:
210 mmc-hs200-1_8v:
215 mmc-hs400-1_2v:
220 mmc-hs400-1_8v:
225 mmc-hs400-enhanced-strobe:
230 no-mmc-hs400:
254 no-mmc:
257 Controller is limited to send MMC commands during
271 It was invented for MMC pwrseq-simple which could be referred to
272 mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay
282 MMC host controller supports HW command queue feature.
287 The presence of this property indicates that the MMC
312 mmc-pwrseq:
315 System-on-Chip designs may specify a specific MMC power
316 sequence. To successfully detect an (e)MMC/SD/SDIO card, that
348 "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
369 mmc3: mmc@1c12000 {
378 mmc-pwrseq = <&sdhci0_pwrseq>;