Lines Matching +full:clock +full:- +full:controller

1 * Samsung S3C2443 Clock Controller
3 The S3C2443 clock controller generates and supplies clock to various controllers
4 within the SoC. The clock binding described here is applicable to all SoCs in
9 - compatible: should be one of the following.
10   - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
11   - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
12   - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
13 - reg: physical base address of the controller and length of memory mapped
15 - #clock-cells: should be 1.
17 Each clock is assigned an identifier and client nodes can use this identifier
18 to specify the clock which they consume. Some of the clocks are available only
22 dt-bindings/clock/s3c2443.h header and can be used in device
28 that they are defined using standard clock bindings with following
29 clock-output-names:
30  - "xti" - crystal input - required,
31  - "ext" - external clock source - optional,
32  - "ext_i2s" - external I2S clock - optional,
33  - "ext_uart" - external uart clock - optional,
35 Example: Clock controller node:
37 	clocks: clock-controller@4c000000 {
38 		compatible = "samsung,s3c2416-clock";
40 		#clock-cells = <1>;
43 Example: UART controller node that consumes the clock generated by the clock
44   controller (refer to the standard clock bindings for information about
45   "clocks" and "clock-names" properties):
48 		compatible = "samsung,s3c2440-uart";
51 		clock-names = "uart", "clk_uart_baud2",