Lines Matching full:flag

477 This flag forces the last transmitted USB packet to be short.
480 This flag can be changed during operation.
482 This flag allows the received transfer length, "xfer->actlen" to be
484 This flag can be changed during operation.
486 This flag allows the reception of multiple short USB frames.
487 This flag
490 This flag can be changed during operation.
492 This flag causes a failing USB transfer to remain first in the PIPE
503 The purpose of this flag is to avoid races when multiple transfers are
508 In this case this flag is used to prevent the following USB transfers
512 This flag can be changed during operation.
516 NOTE: This flag should be set on all BULK and INTERRUPT USB transfers
521 Setting this flag will cause that the total buffer size will be
533 This flag cannot be changed during operation.
537 Setting this flag will cause that no data buffer will be
542 This flag cannot be changed during operation.
546 Setting this flag prevents an USB STATUS stage to be appended to the
549 If no control data is transferred this flag must be cleared.
553 This flag is mostly useful for the USB device side.
555 This flag can be changed during operation.
559 Setting this flag causes the USB_ERR_NO_PIPE error to be ignored.
560 This flag cannot be changed during operation.
566 Setting this flag will cause STALL pids to be sent to the endpoint
572 This flag can be changed during operation.
574 Setting this flag will cause a clear-stall control request to be
578 If this flag is changed outside the USB callback function you have to
580 functions! This flag is automatically cleared after that the stall or
584 If this flag is set the number of frames specified is assumed to give the buffering time in millise…