Lines Matching +full:mode +full:- +full:flag

3 .\" Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
72 via the driver flag
99 The movement and status are encoded in a series of fixed-length data packets
128 .Bl -tag -width Byte_1 -compact
130 .Bl -tag -width bit_7 -compact
155 -256 through 255.
159 -256 through 255.
179 Its value can be modified via the driver flag
189 .Bl -tag -width MOUSE
228 .Bl -tag -width MOUSE
230 This flag specifies the resolution of the pointing device.
238 .Bl -tag -width 0_(medium_high)__ -compact
249 Leaving this flag zero will selects the default resolution for the
252 This flag controls the amount of acceleration effect.
253 The smaller the value of this flag is, more sensitive the movement becomes.
256 Setting this flag to zero will completely disables the
268 .Bd -literal -offset indent
272 set this flag to disable synchronization check and see if it helps.
277 will not carry out model-specific initialization.
285 When this flag is set, the
297 The flag should never be necessary under normal circumstances.
302 This flag will make the
305 Without the flag, the driver will assume this behavior
308 This flag makes
313 The built-in PS/2 pointing device of some laptop computers is somehow
315 the power saving mode,
320 This flag will enable a piece of code in the
326 This flag adds more drastic action for the above problem.
329 driver to reset and re-initialize the pointing device
337 at boot-time.
348 at boot-time.
354 at boot-time.
367 at boot-time.
370 from enabling active multiplexing mode needed for some Synaptics touchpads.
383 .Bl -tag -width MOUSE -compact
393 .Bd -literal
452 .Bl -tag -width 0__ -compact
464 .Bd -literal
492 .It Dv MOUSE_GETMODE Ar mousemode_t *mode
495 .Bd -literal
498     int rate;        /* report rate (per sec), -1 if unknown */
499     int resolution;  /* MOUSE_RES_XXX, -1 if unknown */
534 .Bl -tag -width MOUSE_RES_MEDIUMHIGH__ -compact
559 .Bl -tag -width level_0__ -compact
580 .It Dv MOUSE_SETMODE Ar mousemode_t *mode
583 .Ar mode .
594 If you do not want to change the current setting of a field, put -1
604 .\" .Bd -literal
624 .\" .Bl -tag -width Byte_1 -compact
626 .\" .Bl -tag -width bit_6 -compact
630 .\" 0 - stream mode, 1 - remote mode.
631 .\" In the stream mode, the pointing device sends the device status
632 .\" whenever its state changes. In the remote mode, the host computer
636 .\" driver puts the device in the stream mode.
640 .\" 0 - 1:1 scaling, 1 - 2:1 scaling.
652 .\" .Bl -tag -width bit_6_0 -compact
673 .Bl -tag -width /dev/npsm0 -compact
675 `non-blocking' device node
710 .Bd -literal -offset indent
726 .Bd -literal -offset indent
743 initialized the keyboard controller upon power-up.
760 .Bl -tag -width Byte_1 -compact
762 .Bl -tag -width bit_6 -compact
766 0 - stream mode, 1 - remote mode.
767 In the stream mode, the pointing device sends the device status
769 In the remote mode, the host computer
773 driver puts the device in the stream mode.
778 0 - 1:1 scaling, 1 - 2:1 scaling.
790 .Bl -tag -width bit_6_0 -compact
825 .An -nosplit
851 flag in order to recover from suspended state.
852 This flag is automatically set when one of these devices is detected by the
857 high resolution mode to work properly.
858 Use the driver flag to
861 There is not a guaranteed way to re-synchronize with the first byte