Lines Matching +full:mode +full:- +full:recovery

43 The direct access class includes disk, magneto-optical,
44 and solid-state devices.
55 Parameters affecting the device's cache are stored in mode page 8,
57 Mode pages can be examined and modified via the
61 The read cache is used to store data from device-initiated read ahead
69 (Read Cache Disable) bit in the caching control mode page.
79 a file system is non-deterministic and can cause corruption.
82 recently reported as complete, but it is none-the-less recommended that
93 (Write Cache Enable) bit in the caching control mode page.
100 concurrently, often re-ordering them to reduce the number and length of
106 .Sh BAD BLOCK RECOVERY
109 Media recovery parameters are located in mode page 1,
110 the Read-Write Error Recovery mode page.
114 respectively, of the Read-Write Error Recovery page.
116 Mode pages can be examined and modified
133 .Bl -tag -width 12
141 Disable detection of write-protected disks.
144 detection of write-protected disks is enabled
177 Set to 1 to enable sorting, 0 to disable, -1 to leave it as-is.
181 .Bl -tag -width "ATA_TRIM"
229 .Bl -tag -width ".Pa /dev/da*" -compact