Lines Matching +full:phy +full:- +full:is +full:- +full:integrated

1 .\" Copyright (c) 2006-2014 QLogic Corporation
13 .\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
35 .Bd -ragged -offset indent
43 .Bd -literal -offset indent
52 The NetXtreme II product family is composed of various Converged NIC (or CNIC)
62 .Bl -item -offset indent -compact
72 10/100/1000Mbps operation in full-duplex mode
74 10/100Mbps operation in half-duplex mode
80 .Bl -tag -width ".Cm 10baseT/UTP"
92 .Cm full-duplex
94 .Cm half-duplex
102 .Cm full-duplex
104 .Cm half-duplex
109 .Cm full-duplex
110 mode is supported at this speed.
114 .Cm full-duplex
115 mode is supported.
119 .Cm full-duplex
120 mode is supported.
126 .Bl -tag -width ".Cm full-duplex"
127 .It Cm full-duplex
129 .It Cm half-duplex
142 .Bl -bullet -compact
144 QLogic NetXtreme II BCM5706 1000Base-SX
146 QLogic NetXtreme II BCM5706 1000Base-T
148 QLogic NetXtreme II BCM5708 1000Base-SX
150 QLogic NetXtreme II BCM5708 1000Base-T
152 QLogic NetXtreme II BCM5709 1000Base-SX
154 QLogic NetXtreme II BCM5709 1000Base-T
156 QLogic NetXtreme II BCM5716 1000Base-T
158 Dell PowerEdge 1950 integrated BCM5708 NIC
160 Dell PowerEdge 2950 integrated BCM5708 NIC
162 Dell PowerEdge R710 integrated BCM5709 NIC
188 HP NC382m DP 1GbE Multifunction BL-c Adapter
196 .Bl -tag -width indent
220 Values from 0-100 are valid.
222 Cannot be set to 0 if hw.bce.rx_quick_cons_trip is also 0
227 Values from 0-100 are valid.
228 Valid values are in the range from 0-100.
232 before a status block is generated.
233 Values from 0-256 are valid.
235 Cannot be set to 0 if hw.bce.rx_ticks is also 0 (default 6).
238 a status block is generated duing interrupt processing.
239 Values from 0-256 are valid.
243 update is generated due to TX activitiy.
244 Values from 0-100 are valid.
246 Cannot be set to 0 if hw.bce.tx_quick_cons_trip is also 0
250 before a status block update is generated due to TX activity
251 Values from 0-100 are valid.
255 before a status block is generated.
256 Values from 0-100 are valid.
258 Cannot be set to 0 if hw.bce.tx_ticks is also 0 (default 20).
261 before a status block is generated during an interrupt.
262 Values from 0-100 are valid.
266 .Bl -diag
282 .It "bce%d: PHY probe failed!"
283 The driver could not access the PHY used by the controller.
286 .It "bce%d: Error: PHY read timeout!"
287 The driver could not read a PHY register before the timeout period expired.
288 .It "bce%d: PHY write timeout!"
289 The driver could not write to the PHY register because a timeout occurred.
296 The driver cannot read NVRAM or the NVRAM is corrupt.
298 The driver cannot read NVRAM or the NVRAM is corrupt.
300 The driver cannot read NVRAM or the NVRAM is corrupt.
362 .It "bce%d: Byte swap is incorrect!"
394 Changing the VLAN MTU is not currently supported by the driver.
395 .It "bce%d: Cannot change VLAN_HWTAGGING while management firmware (ASF/IPMI/UMP) is running!"
399 Disabling VLAN tag stripping is not currently supported by the driver.
401 The device has stopped responding to the network, there is a problem
411 or by E-mail at