Lines Matching +full:bridge0 +full:- +full:2
3 # This is rc.conf - a file full of useful variables that you can set
20 ### Important initial Boot-time options ####################
51 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
56 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
60 varmfs_flags="-S" # Extra mount options for the mfs /var
68 var_run_mtree="/var/db/mtree/BSD.var-run.mtree"
102 #geli_da1_flags="-p -k /etc/geli/da1.keys"
104 #geli_mirror_home_flags="-k /etc/geli/home.keys"
106 #geli_storage_flags="-k /etc/geli/storage.keys"
108 #geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys"
111 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
113 fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck
114 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
115 fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y
126 ### Network configuration sub-section ######################
133 hostid_uuidgen_flags="-r" # Flags to uuidgen.
134 machine_id_file="/etc/machine-id" # File with machine-id.
149 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
157 firewall_logif="NO" # Set to YES to create logging-pseudo interface
163 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
175 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
179 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
190 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
217 ipfilter_optionlist="" # optionlist for ipf(8) -T
228 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
241 #pass quick on em4" # multi-rule
242 pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure
250 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
251 ftpproxy_flags="" # additional flags for ftp-proxy(8)
265 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
269 #ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
275 #ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
277 #autobridge_interfaces="bridge0" # List of bridges to check
281 ppp_enable="NO" # Start user-ppp (or NO).
282 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
300 syslogd_flags="-s" # Flags to syslogd (if enabled).
305 inetd_flags="-wW -C 60" # Optional flags to inetd
308 iscsictl_flags="-Aa" # Optional flags to iscsictl.
340 ipropd_master_program="/usr/libexec/ipropd-master"
341 ipropd_master_flags="" # Flags to ipropd-master.
342 ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
346 ipropd_slave_program="/usr/libexec/ipropd-slave"
347 ipropd_slave_flags="" # Flags to ipropd-slave.
348 ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
358 rarpd_flags="-a" # Flags to rarpd.
363 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
369 ftpd_enable="NO" # Enable stand-alone ftpd.
371 ftpd_flags="" # Additional flags to stand-alone ftpd.
381 nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
385 mountd_flags="-r -S" # Flags to mountd (if NFS server enabled).
386 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
405 tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount
407 tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd
413 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
415 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
421 ntp_src_leapfile="/etc/ntp/leap-seconds"
423 ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
425 ntp_leapfile_sources="https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list https://data.iana.org/time-zones/tzdb/leap-seconds.list"
427 ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
428 # e.g. --no-verify-peer
462 routed_flags="-q" # Flags for routing daemon.
495 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
496 #ubthidhci_addr="2" # Check usbconfig list to find the correct
522 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
527 ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
533 #route6d_flags="-l" # Example for route6d with only IPv6 site local
535 #route6d_flags="-q" # If you want to run a routing daemon on an end
545 rtsol_flags="-i" # Flags to IPv6 router solicitation.
548 rtsold_flags="-a -i" # Flags to an IPv6 router solicitation
561 # is 0-31.
569 ip6addrctl_policy="AUTO" # A pre-defined address selection policy
588 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
594 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
609 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
612 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
613 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
614 # Flags for localhost-only MTA
616 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
618 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
645 chkprintcap_flags="-d" # Create missing directories by default.
652 savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
660 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
661 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
662 quotacheck_flags="-a" # Check all file system quotas (if enabled)
669 linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific
672 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
677 # 32-bit compatibility shared library search paths
681 # Local directories with 32-bit compatibility ldconfig
684 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
691 entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
693 # /var/db/entropy-file is preferred if / is not avail.
699 osrelease_enable="YES" # Update /var/run/os-release on boot (or NO).
700 osrelease_file="/var/run/os-release" # File to update for os-release.
701 osrelease_perms="444" # Default permission for os-release file.
705 watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags
708 # Overrides -x in watchdogd_flags.
724 newsyslog_flags="-CN" # Newsyslog flags to create marked files
740 jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration
750 if [ -z "${source_rc_confs_defined}" ]; then
760 if [ -r $i ]; then
766 # Re-do process to pick up [possibly] redefined $rc_conf_files
773 if [ -r $i ]; then
784 if [ -r /etc/defaults/vendor.conf ]; then