Lines Matching +full:1 +full:br +full:- +full:100
8 <BR>
10 <!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
13 <! -- This is deliberately not a mailto -- > <jhawk@MIT.EDU>
16 If you're not running Solaris 2.5.1 or later, it is likely
23 <A HREF="solaris-dosynctodr.html">Here is the report</A>.
27 to the hardware time-of-day clock"). This can be done with the
30 tickadj -s
34 echo dosynctodr/W0 | adb -k -w /dev/ksyms /dev/mem
72 The NTP Version 3 specification RFC-1305 calls for a maximum
73 oscillator frequency tolerance of +-100 parts-per-million (PPM), which is
79 release, this tolerance has been increased to +-500 PPM. <p>However, in the
80 case of certain notorious platforms, in particular Sun 4.1.1 systems, the
84 each interval- timer interrupt, while the variable <tt>tickadj</tt> is used
110 small adjustments to the clock, usually at one-second intervals. If
123 4.1.1 systems. It can also be used to set the value of the kernel
125 synchronize the system clock to the time-of-day clock, something you really
136 than 500 PPM. For machines with a value of <tt>tick</tt> in the 10-ms range,
138 about 100 PPM. In order to determine the value of <tt>tick</tt> for a
141 source (eyeball-and-wristwatch will do) over a day or more. Multiply the
144 <tt>tickadj</tt> useful on SunOS 4.1.1 is:</p>
146 <tt>tickadj</tt> -t 9999 -a 5 -s
148 which sets tick 100 PPM fast, <tt>tickadj</tt> to 5 microseconds and turns
165 <H3>Solaris 2.5 and 2.5.1</H3>
171 4023118</A>. Bryan Cantrill <! -- <bmc@eng.sun.com> --> of Sun
183 Solaris 2.2 and later contain completely re-written clock code to
185 re-written clock code is that adjtime does not round off its
201 tickadj -s -a 1000
202 <BR>ntpdate -v server1 server2
203 <BR>sleep 20
204 <BR>ntpdate -v server1 server2
205 <BR>sleep 20
206 <BR>tickadj -a 200
207 <BR>xntpd
211 adjust value to 1 millisecond. This will insure that an adjtime value