Lines Matching +refs:csh +refs:mode +refs:syntax +refs:table
42 # terminfo syntax
98 # string-table limit of archaic termcap libraries except where explicitly
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
172 # -rv Terminal in reverse video mode (black on white)
175 # -w Wide - in 132 column mode.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
341 ansi+local1|ANSI normal-mode cursor-keys,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
368 ansi+arrows|ANSI normal-mode home and cursor-keys,
371 ansi+apparrows|ANSI application-mode home and cursor-keys,
400 # can also be put into autoprinter mode, where each line is sent to the
405 dec+pp|DEC autoprinter mode,
579 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ANSI (mono mode),
587 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
589 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
591 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
643 # DEC (and most "ANSI") terminals reply with a private-mode ("?") sequence,
898 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
906 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
1031 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1313 # <ich1> is not included because hurd has insert mode.
1318 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1592 # for the application keypad mode. We have added iris-ansi-ap rather than
1593 # change the original to keypad mode.
1607 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1644 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1673 # no vt52 mode
1733 # (For the terminfo master file, I translated these into terminfo syntax.
1873 # NetBSD "wscons" emulator in VT220 mode.
1886 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1894 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1923 # Does not support send/receive mode
1931 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1996 cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode),
2022 cons25|ansis|ansi80x25|FreeBSD console (25-line ANSI mode),
2027 cons25-debian|FreeBSD console with debian backspace (25-line ANSI mode),
2029 cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ANSI mode),
2034 cons30|ansi80x30|FreeBSD console (30-line ANSI mode),
2036 cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ANSI mode),
2038 cons43|ansi80x43|FreeBSD console (43-line ANSI mode),
2040 cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ANSI mode),
2042 cons50|ansil|ansi80x50|FreeBSD console (50-line ANSI mode),
2044 cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ANSI mode),
2046 cons60|ansi80x60|FreeBSD console (60-line ANSI mode),
2048 cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ANSI mode),
2164 # The terminal does not support send/receive mode
2407 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2415 # generates in Application Keypad mode (where "$" means the ESC
2547 # Ordinary VT100 in 132 column ("wide") mode.
2587 vt102-w|DEC VT102 in wide mode,
2643 vt220-old|vt200-old|DEC VT220 in VT100 emulation mode,
2730 vt220-w|vt200-w|DEC VT220 in wide mode,
2733 vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode,
2770 vt220d|DEC VT220 in VT100 mode with DEC function key labeling,
2776 vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins,
2783 # in VT220 mode. This can be gotten around two ways. 1> don't send
2784 # escapes or 2> put the VT220 into VT100 mode and use all the nifty
2787 # This entry takes the view of putting a VT220 into VT100 mode so
2813 #vt320|DEC VT320 in VT100 emulation mode,
2818 vt320nam|v320n|DEC VT320 in VT100 emul. mode with NO AUTO WRAP mode,
2867 # We have to init 132-col mode, not 80-col mode.
2884 # support VT131 and ANSI block mode, but as with much of these things,
2889 # keys were switched into application mode at the same time the numeric pad
2890 # is switched into application mode. This changes the definitions of the
2941 # keys were switched into application mode at the same time the numeric pad
2942 # is switched into application mode. This changes the definitions of the
3047 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3073 # terminal mode is being used. If Set-Up has been disabled or
3246 # * Added "full color" (-c) entries which support the 16-color mode in
3286 # also enable an xterm-compatible 16-color mode.
3492 # * "Allow VT100 application keypage mode" is by default disabled.
3493 # There is no way to press keypad-comma unless application mode is enabled
3495 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3542 # + no VT52 mode for cursor keys, though VT52 screen works in vttest
3555 # mode 47/48 work
3556 # mode 1047 fails to restore cursor position (do not use)
3557 # mode 1049 fails to restore screen contents (do not use)
3666 # numeric keypad application mode does not work
3673 # in meta-mode, imitates xterm, sending UTF-8
3719 # single-user mode [reachable by holding down Command-S during the
3720 # boot process] and when logged in using console mode [reachable by
4051 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT)
4075 # does not recognize SGR-mouse mode
4085 # meta-mode sends escape rather than shifting, in 7-bit mode
4086 # meta-mode does the expected shifting in 8-bit mode
4123 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
4147 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
4188 # between normal- and application-mode for the cursor-keys. That was dropped,
4202 putty-noapp|putty with cursor keys in normal mode,
4289 # norm turn off bold and half-bright mode
4290 # opaq turn off blank mode
4291 # smul2 begin double underline mode
4292 # smol begin overline mode
4293 # rmol exit overline mode
4424 # - no meta mode
4622 # - does not support numeric keypad application mode.
4634 # - SGR mouse mode 1006 works.
4635 # - any-event mouse mode shows no focus-in/focus-out events.
4637 # - alternate screen 1049 mode works.
4677 # - does not support keypad application mode
4680 # - sends escape+key rather than implementing meta mode
4701 # - keypad application mode still does not work; PF1-PF4 are not assigned.
4722 # - does not support keypad application mode
4723 # - supports most xterm mode controls (except DEC Locator Events)
4733 # - sends UTF-8 like xterm for meta mode
4735 # - mouse mode is not reset by reset-sequence
4880 # codes for F1-F4 except while in VT220 mode.
5020 vt100+noapp|fragment with cursor keys in normal mode,
5024 xterm+noapp|fragment with cursor keys in normal mode,
5028 xterm+app|fragment with cursor keys in application mode,
5275 xterm+meta|meta mode for xterm,
5345 # has a different table of default color resource values. If built for
5370 # Emacs 26.1 and later support direct color mode in terminals, using a
5627 xterm-noapp|xterm with cursor keys in normal mode,
5640 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
5703 # mode.
5799 # X11R3 (February 1988) added the highlight/tracking mode.
5836 # "any-event" mouse mode.
5839 # xterm patch #224 (2007/2/11) added private mode 1004, for enabling/disabling
5841 # xterm patch #277 (2012/01/07) added private mode 1006
5864 # locator mode.
5872 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5875 # "1005" mouse mode.
5882 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5885 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5887 # criticism is that the responses provided by the 1005 mode are not distinct
5891 # protocol regarding button-releases), I provided the 1006 mode, referring
5912 # kterm implements acsc via built-in table of X Drawable's
6104 # vt100 LNM mode is not implemented.
6105 # vt100 80/132 column mode is not implemented.
6107 # vt100 DECSCNM mode is not implemented, so flash does not work.
6243 # abandoning that and finally constructing a table to match xterm's default
6274 # - DEC application keypad mode
6279 # - meta mode, as documented in terminfo(5)
6390 # konsole. Some features such as the 1049 private mode are recognized but
6391 # incorrectly implemented as a duplicate of the 47 private mode.
6402 # The 1049 private mode works (but see the other xterm screens in vttest).
6450 # "vt100" key-table files along with a compiled-in default key-table.
6481 # Shift into a placeholder in the table entries. That works well if all of the
6788 # insert), unless private mode 35 is set.
7061 emu|emu native mode,
7091 emu-220|Emu-220 (vt200-7bit mode),
7304 # This version uses a table which supports a single modifier (a subset of
7306 # modifier in this table, function keys f36-f48 are normally unavailable
7329 # no application keypad mode, e.g, kent.
7382 # - sgr referred to unimplemented "invis" mode.
7439 # f) meta mode (km) is not implemented.
7546 # no 132-column mode
7608 # no meta mode
7687 # cancel km, since it is not actually meta mode -TD
7747 # xterm's SGR-mouse mode is recognized.
7750 # bug: X10 mouse mode responds like any-event
7864 # no application-mode for numeric keypad (unless private mode 1035 is set)
7876 # partial support for xterm mouse any-event mode and button-event mode:
7933 # cursor-key application mode works
7949 # any-event mouse mode acts like any-button mode
7950 # implements SGR mouse-mode
8003 # + numeric keypad ANSI application mode escapes don't work.
8004 # + numeric keypad ANSI mode misses "0", ".", ","
8158 …nix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
8203 # program uses a table (rendlist) which equates the SGR codes to terminal
8209 # correspond to the rendlist table.
8211 # The table gives this information:
8604 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
8605 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
8612 # + Most of the mode-settings in the initialization/reset strings are not
8662 # NCSA Telnet 2.6 for Macintosh in VT220 8-bit emulation mode
8665 # use VT wrap mode ON
8668 # 8 bit mode ON
8672 # Application mode is not used.
8689 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in VT220-8 mode,
8715 ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color),
8717 ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line),
8720 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line),
8858 # source shows that its shelltool could tell the host what a particular mode
9205 # nice colors for Emacs (white on blue, mode line white on cyan)
9210 # nice colors for Emacs (white on black, mode line black on cyan)
9279 # mir [move in insert mode] fails in tack?
9557 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
9917 # mode) at 4800 baud and less. I couldn't get the padding right
10201 # \E\\? does not turn off keycode mode
10203 hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode,
10440 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
10536 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
10554 # Ctrl-A Answerback mode (enter answerback message)
10555 # Ctrl-U User friendly mode (normal setup)
10705 # sw5 ON disables dot stretching mode - Factory Setting
10706 # OFF enables dot stretching mode
10759 # This adm31 entry uses underline as the standout mode.
10760 # If the adm31 gives you trouble with standout mode, check the DIP switch in
10764 adm31|LSI adm31 with sw6 set for underline mode,
10802 # The insert mode of this terminal is commented out because it's broken for our
10827 # Standout mode is dim reverse-video.
10842 pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode,
10847 pt250w|Prime PT250 in 132-column mode,
10866 # mode (132 columns). There was a qvt103 which added VT100/VT131 emulations
10882 # setup mode. Shift-s should be a configuration save to NVRAM.
10948 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
10967 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
11045 # S2 4 Edit mode
11107 # S2 4 Edit mode (U = local, D = duplex)
11151 # (including some with magic cookies), fancy half-duplex mode, and
11181 # Then add a suffix from the following table describing installed options
11224 # the following table (these also work on the 920 series):
11333 # they are for the most part only useful in block mode.
11336 # useful in block mode, including "clear X to nulls" (vs. "clear X to
11338 # operations for uploading all or part of the screen; and block-mode
11340 # memory directly). Block mode is used for local editing, and protect
11341 # mode (in conjunction with the "write protect" attribute,
11342 # a.k.a. half-intensity outside of protect mode) is used to control
11349 # useful in block mode.) The descriptions in this file don't use any
11361 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
11378 # Extension print mode (<mc5>) echoes all characters to the printer
11379 # port [in addition to displaying them] except for the page print mode
11382 # reset to page print mode in <rs1> since it may have been enabled
11409 # This uses half-intensity mode (<dim>) for standout (<smso>), and
11669 # 7 X Block mode
11741 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
11751 # conversation mode (\EC) graphics mode off (\E%)
11754 # normal video (\E0) monitor mode off (\EX or \Eu)
11755 # edit mode (\Er) load blank char to space (\Ee\040)
11756 # line edit mode (\EO) enable buffer control (^O)
11757 # protect mode off (\E\047) duplex edit keys (\El)
11955 # use half-intensity as normal mode, full intensity as <bold>
12062 # It's intended to run when the Visual 50 is in VT52 emulation mode
12079 vi50adm|Visual 50 in adm3a mode,
12158 # be done with the menus in set-up mode.
12216 # I made two trivial syntax fixes in the wyse30 entry.
12225 # the protect mode to support one attribute (dim) without cookies.
12251 # This terminal description uses the non-hidden attribute mode
12273 # Normal) without magic cookies by using the protect mode.
12313 # This terminal description uses the non-hidden attribute mode
12421 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12580 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
12585 # Tektronix 4014. But this has no bearing on the native mode.
12588 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
12591 # u0 -> enter Tektronix mode
12592 # u1 -> exit Tektronix mode
12621 # Can't set tabs! Other bugs (ANSI mode only):
12622 # - can't redefine function keys (anyway, key redefinition in ANSI mode
12635 wy99-ansi|Wyse WY-99GT in ANSI mode (int'l PC keyboard),
12669 wy99a-ansi|Wyse WY-99GT in ANSI mode (US PC keyboard),
12851 # This terminal description uses the non-hidden attribute mode
12867 wy75-w|wyse75-w|Wyse 75 in 132 column mode,
12874 # Wyse 85 emulating a VT220 7 bit mode.
12877 # The VT220 mode permits more function keys but it wipes out
12919 # Wyse 85 in 132-column mode.
12920 wy85-w|wyse85-w|Wyse 85 in 132-column mode,
12924 # Wyse 85 in 132-column mode with visual bell.
12938 wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode,
12969 # Wyse 185 emulating a VT320 7 bit mode.
13021 # Wyse 185 in 132-column mode.
13022 wy185-w|wyse185-w|Wyse 185 in 132-column mode,
13027 # Wyse 185 in 132-column mode with visual bell.
13078 wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode,
13097 wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video,
13109 wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode,
13115 wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell,
13126 wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode,
13132 wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell,
13145 # <u0> -> enter Tektronix 4010/4014 mode
13146 # <u1> -> exit Tektronix 4010/4014 mode
13147 # <u2> -> enter ASCII mode (from any ANSI mode)
13148 # <u3> -> exit ASCII mode (goto native ANSI mode)
13149 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
13150 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
13228 # Wyse 370 in 132-column mode.
13229 wy370-w|Wyse 370 in 132-column mode,
13233 # Wyse 370 in 132-column mode with visual bell.
13299 # Wyse 520 emulating a VT420 7 bit mode with default ANSI keyboard
13303 # - Insert : enter insert mode
13310 # keypad in Dec application mode which doesn't seem to work
13355 # Wyse 520 in 132-column mode.
13356 wy520-w|wyse520-w|Wyse 520 in 132-column mode,
13361 # Wyse 520 in 132-column mode with visual bell.
13366 # Wyse 520 emulating a VT420 7 bit mode.
13371 # - Insert : enter insert mode.
13391 # Wyse 520 in 132-column mode.
13392 wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard,
13397 # Wyse 520 in 132-column mode with visual bell.
13461 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
13669 # ^V^O -- clockwise mode on; turn print direction right each time you
13735 rbcomm-w|IBM PC with RBcomm in 132 column mode,
13795 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
13810 att2350|AT&T 2350 Video Information Terminal 80 column mode,
13862 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
13890 # even! the 5420 has three modes: scroll, window or page mode
13891 # this terminfo should work in scroll or window mode, but doesn't
13898 # mode... Unset insert character so insert mode works
13899 # <is1> sets 80 column mode,
13903 # insert mode off, erasure mode off,
13904 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
13905 # 4) reset origin mode
13907 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
13923 # when pressed in SYS PF mode.
13964 # Note that this mode permits programming USER PF KEYS and labels
14023 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
14117 # mode, for example, so all of the <cup> sequences used above have
14156 att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode,
14248 att500|att513|AT&T 513 using page mode,
14389 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
14420 att605-pc|AT&T 605 in pc term mode,
14604 # ESC [ 50;4| set 700 native mode (really is 605)
14613 # ESC [ 13 l monitor mode off
14622 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
14624 # standout mode with \E[m (all normal attributes). The 730 entry simply
14630 # Note: For the same reason as above in rmso I changed exit under-score mode
14827 # 'new line' mode.
14829 # The following are functions not covered in the table above:
14844 # Pn= 3 Graphics mode
14846 # Pn= < Enter new line mode
14847 # Pn= = Enter reverse insert/replace mode
14848 # Pn= ? Enter no scroll mode
14851 # Pn= 3 Exit graphics mode
14853 # Pn= < Exit new line mode
14854 # Pn= = Exit reverse insert/replace mode
14855 # Pn= ? Exit no scroll mode
14870 # Pn3= Key mode being loaded:
14927 # Enable 'Prt on Line' mode: \022 (DC2)
14929 # Disable 'Prt on Line' mode: \024 (DC4)
14999 # mode), this key can be used as the erase key; I find I like this. Because
15062 # numbers of function keys. At least some used monitors in portrait mode,
15094 # and are just set to the default mode of the terminal as shipped
15249 aaa+dec|Ann Arbor Ambassador in DEC VT100 mode,
15347 aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video,
15572 # insert mode. This unfortunately puts the viewpoint90 IN insert
15573 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
15576 # - <msgr> means it's safe to move in standout mode
15664 # compatible it should be in ANSI mode (not VT52). A set-up that
15666 # by pressing ^D in set-up mode. Then increase the brightness with the
15756 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
15759 citoh-6lpi|citoh in 6 lines per inch mode,
15761 citoh-8lpi|citoh in 8 lines per inch mode,
15820 # The termcap won't work in 132 column mode due to the way it it moves the
15822 # handle the 721 in 132 column mode.
15862 # non-conformant (but more featureful) ANSI mode.
15865 visa50|Geveke VISA 50 terminal in ANSI 80 character mode,
15920 # set programmer mode, select window 2, define window at last
15958 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode,
16035 # am: not available in power on mode, but turned on with \E[=107;207h in
16039 # bw: Not available in power on mode, but turned on with \E[=107;207h in
16050 # [Setup mode items changed from factory defaults:]
16087 # [Necessary items not mentioned in setup mode:]
16105 # ll: Not available in power on mode, but turned on with \E[=107;207h in
16120 # 2 for dim (which is ignored in power on mode);
16185 # The first is to set the bell mode to video, transmit a bell character, and
16186 # set the bell mode back - but to what? There is no way of knowing what the
16188 # set the bell mode also sets the key click volume, and there is no way to say
16206 #------- dim= Not available in power on mode.
16308 # <ht> through <el> included to specify padding needed in raw mode.
16339 avt-rv-ns|Concept AVT in reverse video mode/no status line,
16342 avt-w-ns|Concept AVT in 132 column mode/no status line,
16345 avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video,
16420 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
16445 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
16465 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
16476 dgkeys+15|Private entry describing 15 DG mode special keys,
16497 # Default is ACM mode.
16500 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
16503 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
16509 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
16520 dg+color|Color info for Data General D470C terminals in ANSI mode,
16536 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
16546 dgmode+color|Color info for Data General D470C terminals in DG mode,
16554 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
16567 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
16587 dg-generic|generic Data General terminal in DG mode,
16637 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
16638 # backspace on all terminals. This is not so in DG mode.
16641 dg460-ansi|Data General Dasher 460 in ANSI-mode,
16687 # DASHER D210 series terminals in ANSI mode.
16706 # DASHER D210 series terminals in DG mode.
16708 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
16712 # DASHER D211 series terminals in ANSI mode.
16734 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
16746 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
16750 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
16753 # Enhanced DG mode with changes to be more UNIX compatible.
16754 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
16770 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
16774 d217-unix|Data General DASHER D217 in DG-UNIX mode,
16776 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
16779 # DASHER D220 color terminal in ANSI mode.
16789 # \Ec - initial mode defaults (RIS)
16796 d220-7b|Data General DASHER D220 in 7 bit mode,
16809 d220-dg|Data General DASHER D220 color terminal in DG mode,
16815 # DASHER D230C color terminal in ANSI mode.
16827 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
16836 # ^^FJ - normal (80 column) mode
16863 # DASHER D410/D460 series terminals in ANSI mode.
16872 # \E[5;0v - normal (80 column) mode
16890 # \Ec - initial mode defaults (RIS)
16929 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
16937 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
16946 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
16954 # \E[5;1v - compressed (135 column) mode
16963 # \Ec - initial mode defaults (RIS)
16964 # \E[5;1v - compressed (135 column) mode
16968 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
16973 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
16978 …g|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
16982 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
16994 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
17002 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with …
17008 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
17020 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolli…
17025 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
17027 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
17029 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
17031 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
17033 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
17036 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
17038 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
17040 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
17042 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
17044 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
17047 d430c-dg|d430-dg|Data General D430C in DG mode,
17049 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
17052 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
17054 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
17056 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
17058 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
17060 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
17062 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
17064 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
17066 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurabl…
17068 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurab…
17070 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and con…
17073 # DASHER D470C color terminal in ANSI mode.
17074 # Like the D460 but with 16 colors and without a compressed mode.
17095 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
17111 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
17116 # DASHER D555 terminal in ANSI mode.
17120 d555-7b|Data General DASHER D555 in 7-bit mode,
17122 d555-w|Data General DASHER D555 in wide mode,
17124 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
17126 d555-dg|Data General DASHER D555 series in DG mode,
17129 # DASHER D577 terminal in ANSI mode.
17133 d577-7b|Data General DASHER D577 in 7-bit mode,
17135 d577-w|Data General DASHER D577 in wide mode,
17137 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
17140 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
17144 # Like a D577, but without compressed mode; like a D470C in this respect.
17161 d578-7b|Data General DASHER D578 in 7-bit mode,
17265 # except in 132 column mode, where it needs a little padding.
17269 dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode,
17301 excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode,
17305 excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode,
17430 # as ^V, the Control Character Quoting capability (^V in insert mode)
17494 # terminal, than can be switched to X graphics mode (driven over the serial
17511 go140w|graphon go-140 in 132 column mode,
17546 # The key idea is that AEP mode is poison for <cup> & that US's in
17578 # transmit mode associated with ENTER key.
17581 # the screen, then it has dropped into ENTER mode; hit
17769 # h1510 assumed to be in sane escape mode. Else use h1500.
17822 # to insert. That's in insert mode while trying to insert in the middle of
17873 ibm327x|line mode IBM 3270 style,
18233 #ctrl-R Enable bidirectional mode
18234 #ctrl-T Disable bidirectional mode
18248 #ESC $ Semi-graphics mode on
18249 #ESC % Semi-graphics mode off
18250 #ESC & protect mode on
18251 #ESC ' protect mode off
18252 #ESC ( write protect mode off (full intensity)
18253 #ESC ) write protect mode on (half intensity)
18281 #ESC 8 n set scroll mode:
18298 #ESC @ copy print mode on
18299 #ESC A copy print mode off
18300 #ESC B block mode on
18301 #ESC C block mode off (conversation mode)
18309 #ESC H n full graphics mode:
18310 # n = 0 exit full graphics mode
18311 # n = 1 enter full graphics mode
18317 #ESC M L move window left (132 col mode only)
18318 #ESC M R move window right (132 col mode only)
18326 #ESC U set monitor mode (see ESC X, ESC u)
18328 #ESC V n select video attribute mode:
18329 # n = 0 serial field attribute mode
18330 # n = 1 parallel character attribute mode
18339 #ESC V 4 n select screen mode:
18340 # n = 0 page screen mode
18341 # n = 1 virtual screen mode
18342 #ESC V 5 n control mouse mode:
18344 # n = 1 enable sample mode
18346 # n = 3 enable request mode
18348 #ESC X clear monitor mode (see ESC U, ESC u)
18355 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
18383 #ESC ] n set Wordstar mode:
18384 # n = 0 normal (KDS7372) mode
18385 # n = 1 Wordstar mode
18389 #ESC c n enter self-test mode:
18390 # n = 0 exit self test mode
18410 #ESC k n duplex/local edit mode:
18411 # n = 0 duplex edit mode
18412 # n = 1 local edit mode
18433 #ESC q insert mode on
18434 #ESC r edit mode on
18437 #ESC u clear monitor mode (see ESC U, ESC X)
18438 #ESC v autopage mode on
18439 #ESC w autopage mode off
18456 # p2 = program mode:
18473 # The initialization string sets conversation mode, blinking underline cursor,
18474 # full duplex, parallel attribute mode, display user status line, white
18548 # Kimtron entries include (undocumented) codes for: enter dim mode,
18549 # enter bold mode, enter reverse mode, turn off all attributes.
18568 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
18569 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
18571 # 3) In 85h mode, the arrow keys and special functions transmit when
18576 # <is2>. Note that 920E mode does not have software commands to toggle
18583 # 6) auto new-line should be on (selectable from setup mode only)
18586 abm85h|Kimtron ABM 85H native mode,
18595 abm85e|Kimtron ABM 85H in 920E mode,
18625 kt7ix|kimtron model kt-7 or 70 in IX mode,
18684 # p8 - Prism-8 (in national or multinational mode).
18686 # p9 - Prism-9 in ANSI mode.
18688 # p9-8 - Prism-9 in Prism-8 emulation mode.
18691 # p12 - Prism-12 in ANSI mode.
18693 # p12-m - Prism-12 in MDC emulation mode.
18695 # p14 - Prism-14 in ANSI mode.
18697 # p14-m - Prism-14 in MDC emulation mode.
18730 # Cursor key definitions removed because they interfere with vi and csh keys.
18776 # Alternate char set operations only work in multinational mode.
18785 # p8-w: Prism-8 in 132 column mode
18792 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
18796 # p9: Prism-9 in ANSI mode
18814 prism9|p9|P9|MDC Prism-9 in ANSI mode,
18839 # p9-w: Prism-9 in 132 column mode
18844 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
18849 # p9-8: Prism-9 in P8 mode
18852 # P9 terminal in P8 emulation mode.
18856 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
18863 # P9 terminal in P8 emulation mode and 132 column mode.
18865 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
18869 # p12: Prism-12 in ANSI mode
18874 prism12|p12|P12|MDC Prism-12 in ANSI mode,
18877 # p12-w: Prism-12 in 132 column mode
18882 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
18885 # p12-m: Prism-12 in MDC emulation mode
18888 # P12 terminal in MDC emulation mode.
18892 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
18898 # P12 terminal in MDC emulation mode and 132 column mode.
18900 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
18903 # p14: Prism-14 in ANSI mode
18908 prism14|p14|P14|MDC Prism-14 in ANSI mode,
18911 # p14-w: Prism-14 in 132 column mode
18916 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
18919 # p14-m: Prism-14 in MDC emulation mode
18922 # P14 terminal in MDC emulation mode.
18926 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
18932 # P14 terminal in MDC emulation mode and 132 column mode.
18934 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
18959 # The default mime is assumed to be in enhanced act iv mode.
18998 # These termcaps (for mime2a) put the terminal in low intensity mode
18999 # since high intensity mode is so obnoxious.
19009 # This is the preferred mode (but ^X can't be used as a kill character)
19030 # scrolls down and insert mode works without redrawing the rest of the line
19032 # exit graphics mode to get out of insert, but it does not appear to hurt
19034 # programs that use curses and graphics mode this could be a problem.
19173 ncr260vpwpp|NCR 2900/260 viewpoint wide mode,
19215 ncr260vt100wan|NCR 2900/260 VT100 wide mode ANSI keyboard,
19229 ncr260vt100wpp|NCR 2900/260 VT100 wide mode PC+ keyboard,
19277 ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard,
19287 ncr260vt200wpp|NCR 2900/260 VT200 wide mode PC+ keyboard,
19335 ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard,
19348 ncr260vt300wpp|NCR260VT300WPP|NCR 2900/260 VT300 wide mode PC+ keyboard,
19408 ncr260wy325wpp|NCR 2900/260 Wyse 325 wide mode,
19452 ncr260wy350wpp|NCR 2900/260 Wyse 350 wide mode,
19501 ncr260wy50+wpp|NCR 2900/260 Wyse 50+ wide mode,
19540 ncr260wy60wpp|NCR 2900/260 Wyse 60 wide mode,
19550 ncr160vpwpp|NCR 2900/160 viewpoint wide mode,
19556 ncr160vt100wan|NCR 2900/160 VT100 wide mode ANSI keyboard,
19558 ncr160vt100wpp|NCR 2900/160 VT100 wide mode PC+ keyboard,
19564 ncr160vt200wan|NCR 2900/160 VT200 wide mode ANSI keyboard,
19566 ncr160vt200wpp|NCR 2900/160 VT200 wide mode PC+ keyboard,
19572 ncr160vt300wan|NCR 2900/160 VT300 wide mode ANSI keyboard,
19574 ncr160vt300wpp|NCR 2900/160 VT300 wide mode PC+ keyboard,
19578 ncr160wy50+wpp|NCR 2900/160 Wyse 50+ wide mode,
19582 ncr160wy60wpp|NCR 2900/160 Wyse 60 wide mode,
19641 # 2 - Conversational mode / (Local?) Mode
19731 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
19884 # natively block-mode and rather ugly, but they have a character mode which
19926 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
19982 # It's got the Magic Cookie problem around stand-out mode. If you can't
19984 # reverse video. If you like reverse video stand-out mode but don't want
20207 # 0 selects Tek mode, i.e., \E%!0
20208 # 1 selects ANSI mode
20209 # 2 selects ANSI edit-mode
20210 # 3 selects VT52 mode
20213 # is that the cursor addressing is using VT52 mode, and a few others use the
20216 # mode in that capability).
20251 # but vi is said to work (more or less) in this mode.
20289 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
20382 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
20383 # mode). The is string here cleans up a few things (but not
20402 # with colors. The Tektronix color table is mapped into the RGB color
20403 # table by setf/setb. All colors are reset to factory specifications by oc.
20493 # You can add <is2=\E<> to put this 40-column mode, though I can't
20531 vc404-s|Volker-Craig 404 w/standout mode,
20535 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
20807 # Lisaterm in 132 column ("wide") mode.
20808 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
20821 # Lisaterm in 132 column ("wide") mode.
20822 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
21022 osborne-w|osborne1-w|Osborne I in 104-column mode,
21030 osborne|osborne1|Osborne I in 80-column mode,
21152 # It may be used as a terminal by putting it in "line" mode as seen on
21154 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
21156 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
21159 mai|basic4|MAI Basic Four in ANSI mode,
21190 basis|BASIS108 computer with terminal translation table active,
21211 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
21219 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
21280 minitel1b|minitel 1-bistandard (in 40cols mode),
21427 # accentuated chars in 40 cols mode:
21517 # 4. Suppressed nonexistent underlined mode (normally as bright).
21520 # 6. Suppressed nonexistent invisible mode.
21839 # SM SDP mode (VIP command): ^[[?=h
21842 # SM double rendition mode: ^[[?>h
21843 # RM solicited status mode: ^[[5l
21844 # RM character mode: ^[[>l
21845 # RM echoplex mode: ^[[12l
21846 # RM column tab mode: ^[[18l
21847 # RM forbid SS2 keyboard mode: ^[[?<l
21848 # SM scroll mode: ^[[=h
21858 # SM character insertion mode: ^[[4h
21859 # RM character replacement mode: ^[[4l
21864 # SO Line-graphic mode ON: ^N
21865 # SI Line-graphic mode OFF: ^O
21924 # This entry is used for terminals with VT320 emulation mode
21930 # They are used in string capabilities with VT220-320 emulation mode.
21934 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
21939 # DECKPNM numeric keypad mode: esc >
21940 # DECKPAM applic. keypad mode: esc =
21954 # SM DECCKM cursor keys mode: esc [ ? 1 h
21955 # RM DECCKM appli. keys mode: esc [ ? 1 l
21956 # SM DECANM ANSI mode on: esc [ ? 2 h
21957 # RM DECANM ANSI mode off: esc [ ? 2 l
21979 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
21983 # DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 " p
21984 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
21985 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
21986 # DECSCL VT300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
22031 bq300-w-rv|Bull VT320 reverse mode 132 columns,
22038 # This entry is used for terminals with VT320 emulation mode
22045 # DECKPNM numeric keypad mode: esc >
22046 # DECKPAM applic. keypad mode: esc =
22060 # SM DECCKM cursor keys mode: csi ? 1 h
22061 # RM DECCKM appli. keys mode: csi ? 1 l
22062 # SM DECANM ANSI mode on: csi ? 2 h
22063 # RM DECANM ANSI mode off: csi ? 2 l
22085 # DECSCL VT300 mode 8-bit ctrl: csi 6 3 " p
22086 # or DECSCL VT300 mode 8-bit ctrl: csi 6 3 ; 0 " p
22087 # DECSCL VT300 mode 7-bit ctrl: csi 6 3 ; 1 " p
22127 bq300-8rv|Bull VT320 8-bit reverse mode 80 columns,
22137 bq300-w-8rv|Bull VT320 8-bit reverse mode 132 columns,
22144 # This entry is used for terminals with VT320 emulation mode
22155 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
22165 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
22181 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
22202 # normal mode, 8 bits, 80 columns terminal.
22205 # CAMR char. attr. mode reset ^[[G
22206 # CAMS char. attr. mode set ^[[D
22208 # CM character mode (async.) ^[k
22209 # EP echoplex mode (by host) ^[m
22210 # IM insert mode set ^[[I
22211 # IMR insert mode reset ^[[J
22214 # LGR Line-graphic mode reset ^[F
22215 # LGS Line-graphic mode set ^[G
22216 # NEP non echoplex mode (by host) ^[l
22221 # RBM block mode reset ^[[E
22224 # RMR roll mode reset ^[q
22225 # RMS roll mode set ^[r
22231 # SM78 set mode vip7800 ^[[1q
22503 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
22511 # \E> disable alternate keypad mode (so it transmits numbers!)
22513 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
22633 # 5 = ANSI mode (0 = VT52 mode)
22643 h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ANSI mode,
22665 # This terminal suffers from the same famous insert-mode padding lossage
22699 # to put the Z29 into insert mode and insert text at 9600 baud. It
22703 # whenever the program tries to use insert mode, the effective
22706 # What program would want to put the terminal into insert mode
22721 # a termcap entry for the Z29 that says the Z29 has no insert mode.
22726 # involves putting the terminal into ANSI mode, inserting the
22727 # character, and changing it back to H19 mode. All this takes 12
22749 # z29 in ANSI mode. Assumes that the cursor is in the correct state, and that
22756 z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ANSI mode,
22774 z29a-kc-uc|h29a-kc-uc|Zenith z29 ANSI mode with keyclick and underscore cursor,
22778 z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ANSI mode with block cursor and no keyclick,
22782 z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ANSI mode with underscore cursor and no keyclick,
22787 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
22913 # These entries were written (originally in termcap syntax) by Brian Yandell
22983 # like normal mode of operation to be using a Modgraph with 48 line setting.
23020 mt70|mt-70|Morrow MD-70; native Morrow mode,
23146 hirez100-w|Selanar HiREZ-100 in 132-column mode,
23272 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
23289 tab132-w|tab132 in wide mode,
23292 tab132-rv|tab132 in reverse-video mode,
23294 tab132-w-rv|tab132 in reverse-video/wide mode,
23345 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
23407 # Texas Instruments 916 VDT 7 bit control mode
23409 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 VT220 mode 7 bit CTRL,
23423 # Texas Instruments 916 VDT 8 bit control mode
23425 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 VT220 mode bit CTRL,
23433 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
23438 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
23467 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
23469 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
23501 # 928 VDT 7 bit control mode
23510 # 928 VDT 8 bit control mode
23644 # mode.)
23809 # during bootup, it was in text mode, and probably had a terminal emulator
23811 # mode the screen size is 1024x864 pixels.
23945 # 5. implementation of the protect mode would badly penalize the performance.
23947 # other attributes), and keep the status of protect mode in yet another
23948 # static variable. If someone really needs this mode, they would have to
24010 # MS-Kermit with Heath-19 emulation mode enabled
24055 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
24161 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
24165 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
24196 # mode (which is what this entry looks like) and several other lesser-known
24259 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
24376 # Much of the content of this comment is adapted from a table prepared by
24382 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
24383 # sequences. In the main table, \E stands for an escape (\033) character,
24615 # 0 = default mode (attributes off),
24736 # x/y identifies a character by position in the ASCII table (column/row)
24743 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
24747 # 2/0 to 7/14) in the ASCII table
24768 # ASCII table
24771 # table
24774 # more characters ranging from 3/0 to 3/9 in the ASCII table
24798 # mode" or an "overwrite mode". When Control-H is used as a format effector,
24947 # makes this a wretchedly weak standard. The table above is literally
25033 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
25134 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
25217 # escape sequences sent from the terminal to the host when private mode
25219 # ncurses keypad mode to interpret them like a function key. Because the
25220 # 1004 mode is usually combined with other flags to set the mouse protocol,
25222 # mode is assumed to be set, e.g., in XM.
25224 # enables/disables xterm mouse mode.
25242 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
25305 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
25431 # * xterm doesn't try to use application keypad mode any more.
25439 # for computing string-table lengths had a bug in it.
25493 # * -nsl -> -ns. The -pp syntax is obsolete.
25495 # * Make xterm entry do application-keypad mode again. I got complaints
25997 # * remove enter/exit am-mode from cygwin -TD
26762 # * additional cleanup of table-of-contents by reordering -TD
26806 # * correct syntax for padding in some entries: dg211, h19 -TD
26898 # + add putty-noapp entry, and amend putty entry to use application mode
26964 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
27045 # mode does not work with those programs. konsole is debatable -TD
27056 # support xterm's 1006 mode -TD
27377 # + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and
27441 # + add mode 1004 to xterm+sm+1006 from xterm #380 -TD
27463 # + move xterm focus mode 1004 from xterm+sm+1006 into xterm+focus as