WebAssembly: Update datalayout to match fp128 ABI change

This fix goes along with d1a96e906cc03a95cfd41a1f22bdda92651250c7
and makes the fp128 alignment match clang's long double alignment.

Differe

WebAssembly: Update datalayout to match fp128 ABI change

This fix goes along with d1a96e906cc03a95cfd41a1f22bdda92651250c7
and makes the fp128 alignment match clang's long double alignment.

Differential Revision: https://reviews.llvm.org/D105749

show more ...

[WebAssembly] Added initial type checker to MC Assembler

This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm

[WebAssembly] Added initial type checker to MC Assembler

This to protect against non-sensical instruction sequences being assembled,
which would either cause asserts/crashes further down, or a Wasm module being output that doesn't validate.

Unlike a validator, this type checker is able to give type-errors as part of the parsing process, which makes the assembler much friendlier to be used by humans writing manual input.

Because the MC system is single pass (instructions aren't even stored in MC format, they are directly output) the type checker has to be single pass as well, which means that from now on .globaltype and .functype decls must come before their use. An extra pass is added to Codegen to collect information for this purpose, since AsmPrinter is normally single pass / streaming as well, and would otherwise generate this information on the fly.

A `-no-type-check` flag was added to llvm-mc (and any other tools that take asm input) that surpresses type errors, as a quick escape hatch for tests that were not intended to be type correct.

This is a first version of the type checker that ignores control flow, i.e. it checks that types are correct along the linear path, but not the branch path. This will still catch most errors. Branch checking could be added in the future.

Differential Revision: https://reviews.llvm.org/D104945

show more ...

Revert "[WebAssembly] Implementation of global.get/set for reftypes in LLVM IR"

This reverts commit 4facbf213c51e4add2e8c19b08d5e58ad71c72de.

```
********************
FAIL: LLVM :: CodeGen/WebAssem

Revert "[WebAssembly] Implementation of global.get/set for reftypes in LLVM IR"

This reverts commit 4facbf213c51e4add2e8c19b08d5e58ad71c72de.

```
********************
FAIL: LLVM :: CodeGen/WebAssembly/funcref-call.ll (44466 of 44468)
******************** TEST 'LLVM :: CodeGen/WebAssembly/funcref-call.ll' FAILED ********************
Script:
--
: 'RUN: at line 1'; /builddirs/llvm-project/build-Clang12/bin/llc < /repositories/llvm-project/llvm/test/CodeGen/WebAssembly/funcref-call.ll --mtriple=wasm32-unknown-unknown -asm-verbose=false -mattr=+reference-types | /builddirs/llvm-project/build-Clang12/bin/FileCheck /repositories/llvm-project/llvm/test/CodeGen/WebAssembly/funcref-call.ll
--
Exit Code: 2

Command Output (stderr):
--
llc: /repositories/llvm-project/llvm/include/llvm/Support/LowLevelTypeImpl.h:44: static llvm::LLT llvm::LLT::scalar(unsigned int): Assertion `SizeInBits > 0 && "invalid scalar size"' failed.

```

show more ...

[WebAssembly] Implementation of global.get/set for reftypes in LLVM IR

Reland of 31859f896.

This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of r

[WebAssembly] Implementation of global.get/set for reftypes in LLVM IR

Reland of 31859f896.

This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.

Differential Revision: https://reviews.llvm.org/D104797

show more ...

Revert "Implementation of global.get/set for reftypes in LLVM IR"

This reverts commit 31859f896cf90d64904134ce7b31230f374c3fcc.

Causing SVE and RISCV-V test failures on bots.

Implementation of global.get/set for reftypes in LLVM IR

This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once

Implementation of global.get/set for reftypes in LLVM IR

This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.

Reviewed By: tlively

Differential Revision: https://reviews.llvm.org/D95425

show more ...

[WebAssembly] Add NullifyDebugValueLists pass

`WebAssemblyDebugValueManager` does not currently handle
`DBG_VALUE_LIST`, which is a recent addition to LLVM. We tried to
nullify them within the const

[WebAssembly] Add NullifyDebugValueLists pass

`WebAssemblyDebugValueManager` does not currently handle
`DBG_VALUE_LIST`, which is a recent addition to LLVM. We tried to
nullify them within the constructor of `WebAssemblyDebugValueManager` in
D102589, but it made the class error-prone to use because it deletes
instructions within the constructor and thus invalidates existing
iterators within the BB, so the user of the class should take special
care not to use invalidated iterators. This actually caused a bug in
ExplicitLocals pass.

Instead of trying to fix ExplicitLocals pass to make the iterator usage
correct, which is possible but error-prone, this adds
NullifyDebugValueLists pass that nullifies all `DBG_VALUE_LIST`
instructions before we run WebAssembly specific passes in the backend.
We can remove this pass after we implement handlers for
`DBG_VALUE_LIST`s in `WebAssemblyDebugValueManager` and elsewhere.

Fixes https://github.com/emscripten-core/emscripten/issues/14255.

Reviewed By: dschuff

Differential Revision: https://reviews.llvm.org/D102999

show more ...

[WebAssembly] Support for WebAssembly globals in LLVM IR

This patch adds support for WebAssembly globals in LLVM IR, representing
them as pointers to global values, in a non-default, non-integral
ad

[WebAssembly] Support for WebAssembly globals in LLVM IR

This patch adds support for WebAssembly globals in LLVM IR, representing
them as pointers to global values, in a non-default, non-integral
address space. Instruction selection legalizes loads and stores to
these pointers to new WebAssemblyISD nodes GLOBAL_GET and GLOBAL_SET.
Once the lowering creates the new nodes, tablegen pattern matches those
and converts them to Wasm global.get/set of the appropriate type.

Based on work by Paulo Matos in https://reviews.llvm.org/D95425.

Reviewed By: pmatos

Differential Revision: https://reviews.llvm.org/D101608

show more ...

[WebAssembly] Disable uses of __clang_call_terminate

Background:

Wasm EH, while using Windows EH (catchpad/cleanuppad based) IR, uses
Itanium-based libraries and ABIs with some modifications.

`__c

[WebAssembly] Disable uses of __clang_call_terminate

Background:

Wasm EH, while using Windows EH (catchpad/cleanuppad based) IR, uses
Itanium-based libraries and ABIs with some modifications.

`__clang_call_terminate` is a wrapper generated in Clang's Itanium C++
ABI implementation. It contains this code, in C-style pseudocode:
```
void __clang_call_terminate(void *exn) {
__cxa_begin_catch(exn);
std::terminate();
}
```
So this function is a wrapper to call `__cxa_begin_catch` on the
exception pointer before termination.

In Itanium ABI, this function is called when another exception is thrown
while processing an exception. The pointer for this second, violating
exception is passed as the argument of this `__clang_call_terminate`,
which calls `__cxa_begin_catch` with that pointer and calls
`std::terminate` to terminate the program.

The spec (https://libcxxabi.llvm.org/spec.html) for `__cxa_begin_catch`
says,
```
When the personality routine encounters a termination condition, it
will call __cxa_begin_catch() to mark the exception as handled and then
call terminate(), which shall not return to its caller.
```

In wasm EH's Clang implementation, this function is called from
cleanuppads that terminates the program, which we also call terminate
pads. Cleanuppads normally don't access the thrown exception and the
wasm backend converts them to `catch_all` blocks. But because we need
the exception pointer in this cleanuppad, we generate
`wasm.get.exception` intrinsic (which will eventually be lowered to
`catch` instruction) as we do in the catchpads. But because terminate
pads are cleanup pads and should run even when a foreign exception is
thrown, so what we have been doing is:
1. In `WebAssemblyLateEHPrepare::ensureSingleBBTermPads()`, we make sure
terminate pads are in this simple shape:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
```
2. In `WebAssemblyHandleEHTerminatePads` pass at the end of the
pipeline, we attach a `catch_all` to terminate pads, so they will be in
this form:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
catch_all
call @std::terminate()
unreachable
```
In `catch_all` part, we don't have the exception pointer, so we call
`std::terminate()` directly. The reason we ran HandleEHTerminatePads at
the end of the pipeline, separate from LateEHPrepare, was it was
convenient to assume there was only a single `catch` part per `try`
during CFGSort and CFGStackify.

---

Problem:

While it thinks terminate pads could have been possibly split or calls
to `__clang_call_terminate` could have been duplicated,
`WebAssemblyLateEHPrepare::ensureSingleBBTermPads()` assumes terminate
pads contain no more than calls to `__clang_call_terminate` and
`unreachable` instruction. I assumed that because in LLVM very limited
forms of transformations are done to catchpads and cleanuppads to
maintain the scoping structure. But it turned out to be incorrect;
passes can merge cleanuppads into one, including terminate pads, as long
as the new code has a correct scoping structure. One pass that does this
I observed was `SimplifyCFG`, but there can be more. After this
transformation, a single cleanuppad can contain any number of other
instructions with the call to `__clang_call_terminate` and can span many
BBs. It wouldn't be practical to duplicate all these BBs within the
cleanuppad to generate the equivalent `catch_all` blocks, only with
calls to `__clang_call_terminate` replaced by calls to `std::terminate`.

Unless we do more complicated transformation to split those calls to
`__clang_call_terminate` into a separate cleanuppad, it is tricky to
solve.

---

Solution (?):

This CL just disables the generation and use of `__clang_call_terminate`
and calls `std::terminate()` directly in its place.

The possible downside of this approach can be, because the Itanium ABI
intended to "mark" the violating exception handled, we don't do that
anymore. What `__cxa_begin_catch` actually does is increment the
exception's handler count and decrement the uncaught exception count,
which in my opinion do not matter much given that we are about to
terminate the program anyway. Also it does not affect info like stack
traces that can be possibly shown to developers.

And while we use a variant of Itanium EH ABI, we can make some
deviations if we choose to; we are already different in that in the
current version of the EH spec we don't support two-phase unwinding. We
can possibly consider a more complicated transformation later to
reenable this, but I don't think that has high priority.

Changes in this CL contains:
- In Clang, we don't generate a call to `wasm.get.exception()` intrinsic
and `__clang_call_terminate` function in terminate pads anymore; we
simply generate calls to `std::terminate()`, which is the default
implementation of `CGCXXABI::emitTerminateForUnexpectedException`.
- Remove `WebAssembly::ensureSingleBBTermPads() function and
`WebAssemblyHandleEHTerminatePads` pass, because terminate pads are
already `catch_all` now (because they don't need the exception
pointer) and we don't need these transformations anymore.
- Change tests to use `std::terminate` directly. Also removes tests that
tested `LateEHPrepare::ensureSingleBBTermPads` and
`HandleEHTerminatePads` pass.
- Drive-by fix: Add some function attributes to EH intrinsic
declarations

Fixes https://github.com/emscripten-core/emscripten/issues/13582.

Reviewed By: dschuff, tlively

Differential Revision: https://reviews.llvm.org/D97834

show more ...

[WebAssembly] Handle EH terminate pads for cleanup

Terminate pads, cleanup pads with `__clang_call_terminate` call, have
`catch` instruction in them because `__clang_call_terminate` takes an
excepti

[WebAssembly] Handle EH terminate pads for cleanup

Terminate pads, cleanup pads with `__clang_call_terminate` call, have
`catch` instruction in them because `__clang_call_terminate` takes an
exception pointer. But these terminate pads should be reached also in
case of foreign exception. So this pass attaches an additional
`catch_all` BB after every terminate pad BB, with a call to
`std::terminate`.

Reviewed By: tlively

Differential Revision: https://reviews.llvm.org/D94050

show more ...

[WebAssembly] Update basic EH instructions for the new spec

This implements basic instructions for the new spec.

- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds supp

[WebAssembly] Update basic EH instructions for the new spec

This implements basic instructions for the new spec.

- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds support for instruction selection for the new instructions
- `catch` needs a custom routine for the same reason `throw` needs one,
to encode `__cpp_exception` tag symbol.
- Updates `WebAssembly::isCatch` utility function to include `catch_all`
and Change code that compares an instruction's opcode with `catch` to
use that function.
- LateEHPrepare
- Previously in LateEHPrepare we added `catch` instruction to both
`catchpad`s (for user catches) and `cleanuppad`s (for destructors).
In the new version `catch` is generated from `llvm.catch` intrinsic
in instruction selection phase, so we only need to add `catch_all`
to the beginning of cleanup pads.
- `catch` is generated from instruction selection, but we need to
hoist the `catch` instruction to the beginning of every EH pad,
because `catch` can be in the middle of the EH pad or even in a
split BB from it after various code transformations.
- Removes `addExceptionExtraction` function, which was used to
generate `br_on_exn` before.
- CFGStackfiy: Deletes `fixUnwindMismatches` function. Running this
function on the new instruction causes crashes, and the new version
will be added in a later CL, whose contents will be completely
different. So deleting the whole function will make the diff easier to
read.
- Reenables all disabled tests in exception.ll and eh-lsda.ll and a
single basic test in cfg-stackify-eh.ll.
- Updates existing tests to use the new assembly format. And deletes
`br_on_exn` instructions from the tests and FileCheck lines.

Reviewed By: dschuff, tlively

Differential Revision: https://reviews.llvm.org/D94040

show more ...

CodeGen: Refactor regallocator command line and target selection

Make the sequence of passes to select and rewrite instructions to
physical registers be a target callback. This is to prepare to allo

CodeGen: Refactor regallocator command line and target selection

Make the sequence of passes to select and rewrite instructions to
physical registers be a target callback. This is to prepare to allow
targets to split register allocation into multiple phases.

show more ...

[WebAssembly] Add new relocation type for TLS data symbols

These relocations represent offsets from the __tls_base symbol.

Previously we were just using normal MEMORY_ADDR relocations and relying
o

[WebAssembly] Add new relocation type for TLS data symbols

These relocations represent offsets from the __tls_base symbol.

Previously we were just using normal MEMORY_ADDR relocations and relying
on the linker to select a segment-offset rather and absolute value in
Symbol::getVirtualAddress(). Using an explicit relocation type allows
allow us to clearly distinguish absolute from relative relocations based
on the relocation information alone.

One place this is useful is being able to reject absolute relocation in
the PIC case, but still accept TLS relocations.

Differential Revision: https://reviews.llvm.org/D91276

show more ...

[WebAssembly] Rename Emscripten EH functions

Renaming for some Emscripten EH functions has so far been done in
wasm-emscripten-finalize tool in Binaryen. But recently we decided to
make a compilatio

[WebAssembly] Rename Emscripten EH functions

Renaming for some Emscripten EH functions has so far been done in
wasm-emscripten-finalize tool in Binaryen. But recently we decided to
make a compilation/linking path that does not rely on
wasm-emscripten-finalize for modifications, so here we move that
functionality to LLVM.

Invoke wrappers are generated in LowerEmscriptenEHSjLj pass, but final
wasm types are not available in the IR pass, we need to rename them at
the end of the pipeline.

This patch also removes uses of `emscripten_longjmp_jmpbuf` in
LowerEmscriptenEHSjLj pass, replacing that with `emscripten_longjmp`.
`emscripten_longjmp_jmpbuf` is lowered to `emscripten_longjmp`, but
previously we generated calls to `emscripten_longjmp_jmpbuf` in
LowerEmscriptenEHSjLj pass because it takes `jmp_buf*` instead of `i32`.
But we were able use `ptrtoint` to make it use `emscripten_longjmp`
directly here.

Addresses:
https://github.com/WebAssembly/binaryen/issues/3043
https://github.com/WebAssembly/binaryen/issues/3081

Companions:
https://github.com/WebAssembly/binaryen/pull/3191
https://github.com/emscripten-core/emscripten/pull/12399

Reviewed By: dschuff, tlively, sbc100

Differential Revision: https://reviews.llvm.org/D88697

show more ...

[WebAssembly] Check features before making SjLj vars thread-local

1c5a3c4d3823 updated the variables inserted by Emscripten SjLj lowering to be
thread-local, depending on the CoalesceFeaturesAndStri

[WebAssembly] Check features before making SjLj vars thread-local

1c5a3c4d3823 updated the variables inserted by Emscripten SjLj lowering to be
thread-local, depending on the CoalesceFeaturesAndStripAtomics pass to downgrade
them to normal globals if the target features did not support TLS. However, this
had the unintended side effect of preventing all non-TLS-supporting objects from
being linked into modules with shared memory, because stripping TLS marks an
object as thread-unsafe. This patch fixes the problem by only making the SjLj
lowering variables thread-local if the target machine supports TLS so that it
never introduces new usage of TLS that will be stripped. Since SjLj lowering
works on Modules instead of Functions, this required that the
WebAssemblyTargetMachine have its feature string updated to reflect the
coalesced features collected from all the functions so that a
WebAssemblySubtarget can be created without using any particular function.

Differential Revision: https://reviews.llvm.org/D88323

show more ...

[WebAssembly] Make SjLj lowering globals thread-local

Emscripten's longjump and exception mechanism depends on two global variables,
`__THREW__` and `__threwValue`, which are changed to be defined a

[WebAssembly] Make SjLj lowering globals thread-local

Emscripten's longjump and exception mechanism depends on two global variables,
`__THREW__` and `__threwValue`, which are changed to be defined as thread-local
in https://github.com/emscripten-core/emscripten/pull/12056. This patch updates
the corresponding code in the WebAssembly backend to properly declare these
globals as thread-local as well.

Differential Revision: https://reviews.llvm.org/D88262

show more ...

[Attributes] Add a method to check if an Attribute has AttrKind None. Use instead of hasAttribute(Attribute::None)

There's a special case in hasAttribute for None when pImpl is null. If pImpl is not

[Attributes] Add a method to check if an Attribute has AttrKind None. Use instead of hasAttribute(Attribute::None)

There's a special case in hasAttribute for None when pImpl is null. If pImpl is not null we dispatch to pImpl->hasAttribute which will always return false for Attribute::None.

So if we just want to check for None its sufficient to just check that pImpl is null. Which can even be done inline.

This patch adds a helper for that case which I hope will speed up our getSubtargetImpl implementations.

Differential Revision: https://reviews.llvm.org/D86744

show more ...

Reland "[WebAssembly] Eliminate range checks on br_tables"

This reverts commit 755a89591528b692315ad0325347e2fd4637271b.
Although I was not able to reproduce any test failures locally,
aheejin was a

Reland "[WebAssembly] Eliminate range checks on br_tables"

This reverts commit 755a89591528b692315ad0325347e2fd4637271b.
Although I was not able to reproduce any test failures locally,
aheejin was able to reproduce them and found a fix, applied here.

show more ...

Revert "[WebAssembly] Eliminate range checks on br_tables"

This reverts commit f99d5f8c32a822580a732d15a34e8197da55d22b.
The change was causing UBSan and other failures on some bots.

[WebAssembly] Eliminate range checks on br_tables

Summary:
Jump tables for most targets cannot handle out of range indices by
themselves, so LLVM emits range checks to guard the jump
tables. WebAsse

[WebAssembly] Eliminate range checks on br_tables

Summary:
Jump tables for most targets cannot handle out of range indices by
themselves, so LLVM emits range checks to guard the jump
tables. WebAssembly, on the other hand, implements jump tables using
the br_table instruction, which takes a default branch target as an
operand, making the range checks redundant. This patch introduces a
new MachineFunction pass in the WebAssembly backend to find and
eliminate the redundant range checks.

Reviewers: aheejin, dschuff

Subscribers: mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D80863

show more ...

[WebAssembly] Added Debug Fixup pass

This pass changes debug_value instructions referring to stackified registers into TI_OPERAND_STACK with correct stack depth.

[WebAssembly] Disallow 'shared-mem' rather than 'atomics'

Summary:
The WebAssembly backend automatically lowers atomic operations and TLS
to nonatomic operations and non-TLS data when either are pre

[WebAssembly] Disallow 'shared-mem' rather than 'atomics'

Summary:
The WebAssembly backend automatically lowers atomic operations and TLS
to nonatomic operations and non-TLS data when either are present and
the atomics or bulk-memory features are not present, respectively. The
resulting object is no longer thread-safe, so the linker has to be
told not to allow it to be linked into a module with shared
memory. This was previously done by disallowing the 'atomics' feature,
which prevented any objct with its atomic operations or TLS removed
from being linked with any object containing atomics or TLS, and
therefore preventing it from being linked into a module with shared
memory since shared memory requires atomics.

However, as of https://github.com/WebAssembly/threads/issues/144, the
validation rules are relaxed to allow atomic operations to validate
with unshared memories, which makes it perfectly safe to link an
object with stripped atomics and TLS with another object that still
contains TLS and atomics as long as the resulting module has an
unshared memory. To allow this kind of link, this patch disallows a
pseudo-feature 'shared-mem' rather than 'atomics' to communicate to
the linker that the object is not thread-safe. This means that the
'atomics' feature is available to accurately reflect whether or not an
object has atomics enabled.

As a drive-by tweak, this change also requires that bulk-memory be
enabled in addition to atomics in order to use shared memory. This is
because initializing shared memories requires bulk-memory operations.

Reviewers: aheejin, sbc100

Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D79542

show more ...

[WebAssembly] Replace all calls with generalized multivalue calls

Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types,

[WebAssembly] Replace all calls with generalized multivalue calls

Summary:
Extends the multivalue call infrastructure to tail calls, removes all
legacy calls specialized for particular result types, and removes the
CallIndirectFixup pass, since all indirect call arguments are now
fixed up directly in the post-insertion hook.

In order to keep supporting pretty-printed defs and uses in test
expectations, MCInstLower now inserts an immediate containing the
number of defs for each call and call_indirect. The InstPrinter is
updated to query this immediate if it is present and determine which
MCOperands are defs and uses accordingly.

Depends on D72902.

Reviewers: aheejin

Subscribers: dschuff, mgorny, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D74192

show more ...

Make llvm::StringRef to std::string conversions explicit.

This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.

This is mostly m

Make llvm::StringRef to std::string conversions explicit.

This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.

This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.

This doesn't actually modify StringRef yet, I'll do that in a follow-up.

show more ...

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by

CMake: Make most target symbols hidden by default

Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.

A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.

This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so

One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.

Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278

Reviewers: chandlerc, beanz, mgorny, rnk, hans

Reviewed By: rnk, hans

Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits

Tags: #llvm

Differential Revision: https://reviews.llvm.org/D54439

show more ...