examples: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new

examples: check status of getting ethdev info

rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples/ip_reassembly: enable IP checksum offload

As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.

Signed-off-by: Sunil Kum

examples/ip_reassembly: enable IP checksum offload

As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>

show more ...

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
-

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
- rename IPV4_IHL_MULTIPLIER as RTE_IPV4_IHL_MULTIPLIER.
- rename IPV4_HDR_DF_SHIFT as RTE_IPV4_HDR_DF_SHIFT.
- rename IPV4_HDR_MF_SHIFT as RTE_IPV4_HDR_MF_SHIFT.
- rename IPV4_HDR_FO_SHIFT as RTE_IPV4_HDR_FO_SHIFT.
- rename IPV4_HDR_DF_FLAG as RTE_IPV4_HDR_DF_FLAG.
- rename IPV4_HDR_MF_FLAG as RTE_IPV4_HDR_MF_FLAG.
- rename IPV4_HDR_OFFSET_MASK as RTE_IPV4_HDR_OFFSET_MASK.
- rename IPV4_HDR_OFFSET_UNITS as RTE_IPV4_HDR_OFFSET_UNITS.
- rename IPV4_ANY as RTE_IPV4_ANY.
- rename IPV4_LOOPBACK as RTE_IPV4_LOOPBACK.
- rename IPV4_BROADCAST as RTE_IPV4_BROADCAST.
- rename IPV4_ALLHOSTS_GROUP as RTE_IPV4_ALLHOSTS_GROUP.
- rename IPV4_ALLRTRS_GROUP as RTE_IPV4_ALLRTRS_GROUP.
- rename IPV4_MAX_LOCAL_GROUP as RTE_IPV4_MAX_LOCAL_GROUP.
- rename IPV4_MIN_MCAST as RTE_IPV4_MIN_MCAST.
- rename IPV4_MAX_MCAST as RTE_IPV4_MAX_MCAST.
- rename IS_IPV4_MCAST as RTE_IS_IPV4_MCAST.
- rename IPV6_HDR_FL_SHIFT as RTE_IPV6_HDR_FL_SHIFT.
- rename IPV6_HDR_TC_SHIFT as RTE_IPV6_HDR_TC_SHIFT.
- rename IPV6_HDR_FL_MASK as RTE_IPV6_HDR_FL_MASK.
- rename IPV6_HDR_TC_MASK as RTE_IPV6_HDR_TC_MASK.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename is_unicast_ether_addr() as rte_is_unicast_ether_addr().
- rename is_multicast_ether_addr() as rte_is_multicast_ether_addr().
- rename is_broadcast_ether_addr() as rte_is_broadcast_ether_addr().
- rename is_universal_ether_addr() as rte_is_universal_ether_addr().
- rename is_local_admin_ether_addr() as rte_is_local_admin_ether_addr().
- rename is_valid_assigned_ether_addr() as rte_is_valid_assigned_ether_addr().
- rename eth_random_addr() as rte_eth_random_addr().
- rename ether_addr_copy() as rte_ether_addr_copy().
- rename ether_format_addr() as rte_ether_format_addr().

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keepin

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.

Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

examples: fix RSS hash function configuration

ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware

This check breaks some s

examples: fix RSS hash function configuration

ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware

This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.

Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.

Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>

show more ...

ethdev: remove old offload API

In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue

ethdev: remove old offload API

In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload

For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.

The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE

The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>

show more ...

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the applica

ethdev: deprecate port count function

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

fix ethdev ports enumeration

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Suc

fix ethdev ports enumeration

Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application

Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.

There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application

Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

examples: increase default ring sizes to 1024

Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)

Signed-off-by: Kevin Laatz <kevin.laat

examples: increase default ring sizes to 1024

Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

show more ...

examples/ip_reassembly: convert to new ethdev offloads API

Ethdev offloads API has changed since:

commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: intro

examples/ip_reassembly: convert to new ethdev offloads API

Ethdev offloads API has changed since:

commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")

This commit support the new API.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: use SPDX tag for Intel copyright files

Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.

Signed-off-by: Bruce Richardson <bruce.richardson@i

examples: use SPDX tag for Intel copyright files

Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

examples: remove dependency on PCI

All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sa

examples: remove dependency on PCI

All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...

remove useless memzone includes

The memzone header is often included without good reason.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

examples/ip_reassembly: use pktmbuf to create mempool

Use of rte_mempool_create() with the helper provided in
librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool

examples/ip_reassembly: use pktmbuf to create mempool

Use of rte_mempool_create() with the helper provided in
librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool else
it may not work on implementation using the HW buffer pool

Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

show more ...

ethdev: increase port id range

Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at

ethdev: increase port id range

Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.

Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.

release_17_11 and deprecation docs have been updated in this patch.

Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

examples: remove duplicate includes

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

examples: adjust Rx and Tx descriptors to device limits

Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>

examples: limit max frame size

Some PMDs do not support 9,5K jumbo frames, so the example fails.
Limit the frame size to the maximum supported by the underlying NIC.

Signed-off-by: Andriy Berestovs

examples: limit max frame size

Some PMDs do not support 9,5K jumbo frames, so the example fails.
Limit the frame size to the maximum supported by the underlying NIC.

Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>

show more ...

examples: enable HW CRC strip by default

Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rx

examples: enable HW CRC strip by default

Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.

Cc: stable@dpdk.org

Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>

show more ...

lpm6: extend next hop field

This patch extend next_hop field from 8-bits to 21-bits in LPM library
for IPv6.

Added versioning symbols to functions and updated
library and applications that have a d

lpm6: extend next hop field

This patch extend next_hop field from 8-bits to 21-bits in LPM library
for IPv6.

Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.

Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...