# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=aarch64 -mcpu=neoverse-v2 --timeline --timeline-max-iterations=4 < %s | FileCheck %s

# LLVM-MCA-BEGIN FPR8-bit
ldr b0, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN FPR16-bit
ldr h0, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN FPR32-bit
ldr s0, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN FPR64-bit
ldr d0, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN FPR128-bit
ldr q0, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN SIMD64-bit-b
ld1 {v0.8b}, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN SIMD64-bit-h
ld1 {v0.4h}, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN SIMD64-bit-s
ld1 {v0.2s}, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN SIMD64-bit-d
ld1 {v0.1d}, [sp]
add z0.d, z0.d, z0.d
# LLVM-MCA-END

# LLVM-MCA-BEGIN insr
insr z0.s, w0
add z0.s, z0.s, z0.s
# LLVM-MCA-END

# CHECK:      [0] Code Region - FPR8-bit

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ldr	b0, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ldr	b0, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ldr	b0, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ldr	b0, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ldr	b0, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ldr	b0, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ldr	b0, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [1] Code Region - FPR16-bit

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ldr	h0, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ldr	h0, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ldr	h0, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ldr	h0, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ldr	h0, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ldr	h0, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ldr	h0, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [2] Code Region - FPR32-bit

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ldr	s0, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ldr	s0, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ldr	s0, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ldr	s0, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ldr	s0, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ldr	s0, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ldr	s0, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [3] Code Region - FPR64-bit

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ldr	d0, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ldr	d0, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ldr	d0, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ldr	d0, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ldr	d0, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ldr	d0, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ldr	d0, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [4] Code Region - FPR128-bit

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ldr	q0, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ldr	q0, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ldr	q0, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ldr	q0, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ldr	q0, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ldr	q0, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ldr	q0, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [5] Code Region - SIMD64-bit-b

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ld1	{ v0.8b }, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ld1	{ v0.8b }, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ld1	{ v0.8b }, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ld1	{ v0.8b }, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ld1	{ v0.8b }, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ld1	{ v0.8b }, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ld1	{ v0.8b }, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [6] Code Region - SIMD64-bit-h

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ld1	{ v0.4h }, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ld1	{ v0.4h }, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ld1	{ v0.4h }, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ld1	{ v0.4h }, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ld1	{ v0.4h }, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ld1	{ v0.4h }, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ld1	{ v0.4h }, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [7] Code Region - SIMD64-bit-s

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ld1	{ v0.2s }, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ld1	{ v0.2s }, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ld1	{ v0.2s }, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ld1	{ v0.2s }, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ld1	{ v0.2s }, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ld1	{ v0.2s }, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ld1	{ v0.2s }, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [8] Code Region - SIMD64-bit-d

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      44
# CHECK-NEXT: Total uOps:        200

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    4.55
# CHECK-NEXT: IPC:               4.55
# CHECK-NEXT: Block RThroughput: 0.3

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      6     0.33    *                   ld1	{ v0.1d }, [sp]
# CHECK-NEXT:  1      2     0.25                        add	z0.d, z0.d, z0.d

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -     0.25   0.25   0.25   0.25

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -     0.33   0.33   0.34    -      -      -      -      -      -      -      -      -      -     ld1	{ v0.1d }, [sp]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.25   0.25   0.25   0.25   add	z0.d, z0.d, z0.d

# CHECK:      Timeline view:
# CHECK-NEXT:                     01
# CHECK-NEXT: Index     0123456789

# CHECK:      [0,0]     DeeeeeeER ..   ld1	{ v0.1d }, [sp]
# CHECK-NEXT: [0,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [1,0]     DeeeeeeE--R.   ld1	{ v0.1d }, [sp]
# CHECK-NEXT: [1,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [2,0]     DeeeeeeE--R.   ld1	{ v0.1d }, [sp]
# CHECK-NEXT: [2,1]     D======eeER.   add	z0.d, z0.d, z0.d
# CHECK-NEXT: [3,0]     D=eeeeeeE-R.   ld1	{ v0.1d }, [sp]
# CHECK-NEXT: [3,1]     D=======eeER   add	z0.d, z0.d, z0.d

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     1.3    1.3    1.3       ld1	{ v0.1d }, [sp]
# CHECK-NEXT: 1.     4     7.3    0.0    0.0       add	z0.d, z0.d, z0.d
# CHECK-NEXT:        4     4.3    0.6    0.6       <total>

# CHECK:      [9] Code Region - insr

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      200
# CHECK-NEXT: Total Cycles:      803
# CHECK-NEXT: Total uOps:        300

# CHECK:      Dispatch Width:    16
# CHECK-NEXT: uOps Per Cycle:    0.37
# CHECK-NEXT: IPC:               0.25
# CHECK-NEXT: Block RThroughput: 1.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  2      6     1.00                        insr	z0.s, w0
# CHECK-NEXT:  1      2     0.25                        add	z0.s, z0.s, z0.s

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - V2UnitB
# CHECK-NEXT: [0.1] - V2UnitB
# CHECK-NEXT: [1.0] - V2UnitD
# CHECK-NEXT: [1.1] - V2UnitD
# CHECK-NEXT: [2.0] - V2UnitFlg
# CHECK-NEXT: [2.1] - V2UnitFlg
# CHECK-NEXT: [2.2] - V2UnitFlg
# CHECK-NEXT: [3]   - V2UnitL2
# CHECK-NEXT: [4.0] - V2UnitL01
# CHECK-NEXT: [4.1] - V2UnitL01
# CHECK-NEXT: [5]   - V2UnitM0
# CHECK-NEXT: [6]   - V2UnitM1
# CHECK-NEXT: [7]   - V2UnitS0
# CHECK-NEXT: [8]   - V2UnitS1
# CHECK-NEXT: [9]   - V2UnitS2
# CHECK-NEXT: [10]  - V2UnitS3
# CHECK-NEXT: [11]  - V2UnitV0
# CHECK-NEXT: [12]  - V2UnitV1
# CHECK-NEXT: [13]  - V2UnitV2
# CHECK-NEXT: [14]  - V2UnitV3

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -     1.00    -      -      -      -      -     0.33   1.00   0.33   0.34

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1.0]  [1.1]  [2.0]  [2.1]  [2.2]  [3]    [4.0]  [4.1]  [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12]   [13]   [14]   Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -     1.00    -      -      -      -      -      -     1.00    -      -     insr	z0.s, w0
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     0.33    -     0.33   0.34   add	z0.s, z0.s, z0.s

# CHECK:      Timeline view:
# CHECK-NEXT:                     0123456789          01234
# CHECK-NEXT: Index     0123456789          0123456789

# CHECK:      [0,0]     DeeeeeeER .    .    .    .    .   .   insr	z0.s, w0
# CHECK-NEXT: [0,1]     D======eeER    .    .    .    .   .   add	z0.s, z0.s, z0.s
# CHECK-NEXT: [1,0]     D========eeeeeeER   .    .    .   .   insr	z0.s, w0
# CHECK-NEXT: [1,1]     D==============eeER .    .    .   .   add	z0.s, z0.s, z0.s
# CHECK-NEXT: [2,0]     D================eeeeeeER.    .   .   insr	z0.s, w0
# CHECK-NEXT: [2,1]     D======================eeER   .   .   add	z0.s, z0.s, z0.s
# CHECK-NEXT: [3,0]     D========================eeeeeeER .   insr	z0.s, w0
# CHECK-NEXT: [3,1]     D==============================eeER   add	z0.s, z0.s, z0.s

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     4     13.0   0.3    0.0       insr	z0.s, w0
# CHECK-NEXT: 1.     4     19.0   0.0    0.0       add	z0.s, z0.s, z0.s
# CHECK-NEXT:        4     16.0   0.1    0.0       <total>
