/*
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This software was developed by the Computer Systems Engineering group
 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
 * contributed to Berkeley.
 *
 * %sccs.include.redist.c%
 *
 * from: $Header: bzero.s,v 1.1 92/06/25 12:52:46 torek Exp $
 */

#if defined(LIBC_SCCS) && !defined(lint)
	.asciz "@(#)bzero.s	8.1 (Berkeley) 06/04/93"
#endif  /* LIBC_SCCS and not lint */

#include "DEFS.h"

/*
 * bzero(addr, len)
 *
 * We should unroll the loop, but at the moment this would
 * gain nothing since the `std' instructions are what limits us.
 */
ENTRY(bzero)
	! %o0 = addr, %o1 = len

	! Optimize a common case: addr and len are both multiples of 8.
	or	%o0, %o1, %o2
	btst	7, %o2			! ((addr | len) & 7) != 0?
	bnz	1f			! if so, cannot optimize
	 clr	%g1			! in any case, we want g1=0

	/* `Good' operands, can just store doubles. */
0:
	deccc	8, %o1			! while ((len -= 8) >= 0)
	bge,a	0b
	 std	%g0, [%o0 + %o1]	!	*(quad *)(addr + len) = 0;
	retl
	nop

	/*
	 * Either the address is unaligned, or the count is not a
	 * multiple of 8, or both.  We will have to align the address
	 * in order to use anything `better' than stb.
	 */
1:
	cmp	%o1, 15			! len >= 15?
	bge,a	Lstd			! yes, use std
	 btst	1, %o0			! (but first check alignment)

	! not enough to bother: do byte-at-a-time loop.
2:
	deccc	%o1			! while (--len >= 0)
	bge,a	2b
	 stb	%g0, [%o0 + %o1]	!	addr[len] = 0;
	retl
	 nop

Lstd:
	/*
	 * There are at least 15 bytes to zero.
	 * We may have to zero some initial stuff to align
	 * the address.
	 */
	bz,a	1f			! if (addr & 1) {
	 btst	2, %o0
	stb	%g0, [%o0]		!	*addr = 0;
	inc	%o0			!	addr++;
	dec	%o1			!	len--;
	btst	2, %o0			! }
1:
	bz,a	1f			! if (addr & 2) {
	 btst	4, %o0
	sth	%g0, [%o0]		!	*(short *)addr = 0;
	inc	2, %o0			!	addr += 2;
	dec	2, %o1			!	len -= 2;
	btst	4, %o0			! }
1:
	bz	1f			! if (addr & 4) {
	 dec	8, %o1
	st	%g0, [%o0]		!	*(int *)addr = 0;
	inc	4, %o0			!	addr += 4;
	dec	4, %o1			!	len -= 4;
					! }
	/*
	 * Address is double word aligned; len is 8 less than
	 * the number of bytes remaining (i.e., len is 0 if
	 * the remaining count is 8, 1 if it is 9, etc.).
	 */
1:
	std	%g0, [%o0]		! do {
2:					!	*(quad *)addr = 0;
	inc	8, %o0			!	addr += 8;
	deccc	8, %o1			! } while ((len -= 8) >= 0);
	 bge,a	2b
	std	%g0, [%o0]

	/*
	 * Len is in [-8..-1] where -8 => done, -7 => 1 byte to zero,
	 * -6 => two bytes, etc.  Mop up this remainder, if any.
	 */
	btst	4, %o1
	bz	1f			! if (len & 4) {
	 btst	2, %o1
	st	%g0, [%o0]		!	*(int *)addr = 0;
	inc	4, %o0			!	addr += 4;
1:
	bz	1f			! if (len & 2) {
	 btst	1, %o1
	sth	%g0, [%o0]		!	*(short *)addr = 0;
	inc	2, %o0			!	addr += 2;
1:
	bnz,a	1f			! if (len & 1)
	 stb	%g0, [%o0]		!	*addr = 0;
1:
	retl
	 nop
